EVE Audio SC204 + TS107

EVE Audio SC204 + TS107

SC204
The SC204 are the smallest speakers in our studio monitors line. And they were built with quality in mind.
If you are working at home, or in a music or post-production studio, a small pair of monitors should not compromise the quality of your results. It should serve as a second pair of ears. The SC204 may have a small footprint. But don't let their size deceive you, these monitors sound bigger than many monitors twice their size!
The SC204 also have the convenience of threaded screw inserts on the bottom and the back. That way, you can mount your SC204 on a regular microphone or speaker stand, or use the back plate for different wall mounting options available on the market.
The SC204 uses a 4" SilverCone woofer with honeycomb structured diaphragm, driven by a sophisticated low distortion copper cap magnet system with a 1" voice coil responsible for creating a greater linear excursion. This produces a bigger dynamic than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio transparency of our proprietary AMT tweeter and PWM amplifier combination, this SC204 will surprise you with a very powerful, tight and precise low end.

Specifications:

• Frequency range (-3db): 64 Hz - 21 kHz
• Tweeter: AMT RS1
• Mid-woofer: 100 mm (4")
• Transition frequency: 3000 Hz
• Max. SPL @ 1m: 96 dB
• Number of amplifiers: 2
• Total short-term output power: 100 W
• Output power (woofer): 50 W
• Output power (tweeter): 50 W
• Limiter
• Settings: Volume: -inf, - +6 dB
• High-shelf filter (-5 db - +3db): > 3 kHz
• Desk filter boost (0db - +3db): 80 Hz
• Desk filter cut (-5 db - 0db): 300 Hz
• Low-shelf filter (-5 db - +3db): < 300 Hz
• Level-lock dip switch
• Filter-lock dip switch
• Connections: XLR in (Impedance 10k)
• RCA in (Impedance 10k)
• Power consumption: Standby
• Full output Max 70 VA
• Back mounting thread inserts
• Mic stand thread inserts
• Dimensions (W x H x D): 145 x 230 x 195 mm
• Weight: 3.8 kg

TS107
You can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts. Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.
The TS107 is the smallest model in the range of EVE Audio subwoofers and features a very efficient 100W PWM amplifier that drives a proprietary 6.5" woofer. This guarantees a frequency response of down to 36Hz up to 300 Hz, for a maximum output power of 102 dB (SPL @ 1m).
One thing worthy of mentioning is that the DSP section, which uses a high resolution BurrBrown converter, only affects the bass driver operation. The signal path to the satellite speakers is kept purely analog, with no A/D/A conversions whatsoever. That's why the "Pure Satellite" function, when activated, completely bypasses the subwoofer and DSP filter section, and will only allow you to adjust your satellite's volume.
The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.
All in all, the ThunderStorm subwoofers will make any system sound better and more complete.
As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience. In addition, TS107 features an unbalanced input for connecting SC203, too.

Specifications:

• Frequency range (-3 dB): 36 - 300 Hz
• Woofer: 165 mm / 6.5"
• Max. SPL @ 1m: 102 dB
• Max. Output power (interm.): 100 W
• Passive radiator instead of bass reflex port
• No disturbing flow noise by air turbulence
• Limiter
• Controls for volume (Satellite & Sub): -inf, - +6 dB
• Encoder knobs with LED ring screen
• Volume and filter adjustment
• Input Level switch: +7 dBu / +22 dBu
• Phase Reversal: 0/180
• Switchable satellite filters: flat / 80Hz
• Variable subwoofer filter: 60 Hz -140 Hz + LFE
• Inputs (L-R and LFE). 3 x XLR balanced (10 ohms)
• Outputs (L-R and LFE / Sub):. 3 x XLR balanced (10 ohms)
• Power consumption: Standby <1 W
• Maximum: 120 VA
• Dimensions (W x H x D): 230 x 355 x 300 mm
• Weight: 8.2 kg
• Includes infrared remote control