DBX 223 S

DBX 223-S

DBX 223s dual-channel crossover is equipped with everything you would expect from a fully professional unit. On board you will find 223 S Linwitz-Riley filters (24 dB per octave), independently controlled level of gain for each channel, 40 Hz high-pass filter, optional summation mono subwoofer output and output phase reversal.
DBX 223s has been designed for precise control of input and output, using high-quality large jack sockets (1/4 "TRS).

Basic features:
• Balanced TRS inputs and outputs
• Mode switch: 2-way stereo or mono 3-way
• Aggregation of low frequency
• 10-band switch on both channels
• 40Hz high-pass filter on both channels
• phase reversal switch all channels
• Individual control gain level on all channels
• Linkwitz-Riley filters (24dB per octave)
• LED for indicating operation (Stereo / Mono)

Specifications:
• Inputs - 1/4 "TRS
• Input type - Electronically balanced / unbalanced, RF filtered
• Input impedance - symmetrical> 50k ohms unbalanced> 25k ohm
• The maximum input level - higher than + 22dBu balanced / unbalanced
• common-mode rejection ratio (CMRR) - greater than 40dbB, typically greater than 55dB at 1kHz
• Outputs - 1/4 "TRS
• Type exit - impedance balanced / unbalanced, RF filtered
• Output Impedance - 200 ohm balanced, unbalanced 100 ohm
• Maximum output level - higher than + 21dBu balanced / unbalanced
• Bandwidth - 20Hz to 20kHz +/- 0.5dB
• The ratio of noise to the signal - ref. +4 DBu, 22 kHz measurement bandwidth
• The ratio of noise to the signal (stereo mode) - greater than 94dB (Low Output), greater than 91dB (High Output)
• noise to signal ratio (Mono Mode) - greater than 94dB (Low Output), greater than 93dB (Mid Output),> 91dB (High Output)
• Dynamic range: greater than 106 dB, weighted, any output
• Power consumption: 15W
• Weight: 1.7 kg
• Packaged Weight: 2.5 kg