Název: | PowerSoft M 50 Q HDSP+ETH výkonový zesilovač |
---|---|
Výrobce: | PowerSoft |
Id zboží / Kód: | 155401 / PWSOFT-M50Q-HDSP |
Množství na skladu: | 0 pcs. |
Produkt již není k dispozici. |
PowerSoft M 50 Q
With 5,000 W across four channels in a single rack space unit at a mere 7.4 kg / 16.3 lb weight, the M50Q is equally versatile in touring and permanently installed racks.
Legendary sound quality deriving from Powersoft's patented technologies, and outstandingly high efficiency are making the M50Q the leader in its class. Optimized for mid-sized sound systems and 4? loads, it is a fantastic value, practically as well as commercially. In use worldwide by leading touring and event sound companies, Powersoft amplifiers are preferred among the top ranking system designers, sound engineers, and contractors for providing reliable premier-grade power and headroom in the smallest possible package size.
Maximum efficiency warrants minimum current draw, heat dissipation and power consumption, resulting in "green" products, saving the user a substantial amount of money over time.
The M50Q HDSP+ETH version provides on-board DSP and Ethernet interfaces.
The high-performance DSP is hidden inside and safe against accidental or intentional tampering; monitoring and amplifier settings can be done via Armonía Pro Audio Suite™ (Interface available for MediaMatrix, Crestron, AMX, Q-SYS and monitoring systems). Locally, the M50Q HDSP+ETH lets the user access up to four presets per pushbutton on the rear panel.
Features:
• Advanced switch-mode power supply technology for high performance and compact size
• Fixed frequency switch mode output
• Patented output filter with ripple cancellation network
• Ac protection: shut down power supply when AC mains voltage is outside operating range
• Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
• DC protection: protects against infrasonic signal at the outputs
• VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
• Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
• Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
• Thermal protection: output stages operating temperature up to 75 °C (167 °F)
• Temperature controlled continous variable speed fan, front to back airflow
• Analog Devices ADAU 1701 DSP architecture
• 24 bit @ 48 kHz, 120 dB S/N AD/DA converters
• Separate input/output EQ's with numerous filters of various types up to 48 dB/oct
• Peak, RMS, and frequency dependent limiters
• Delay for time alignment
• Direct drive constant voltage, 70V Hi-Z distributed lines
• Compact size - all models only 1 RU for reduced rack cost and space
• Light weight - all models only 7.4 kg (16.3 pounds) for easier racking and shipping
• Neutrik XLR balanced inputs with loop thru XLR and Speakon outputs connectors
• Recessed stepped attenuators
• Modular construction
• Control and monitoring through Armonía Pro Audio Suit
• Interface available for MediaMatrix, Crestron, AMX, Q-SYS control and monitoring systems
Specifications:
• Amplifier Type: Power Amplifier
• Number of channels: 4 (dual stereo), 2 (mono bridge)
• Output Power: 4 Ω - 4 x 1,250 W, 8 Ω - 4 x 750 W mono (bridge), 8 Ω - 2 x 2.500 W
• Input Impedance: 10 Ohms
• Input Connections: 4 x Neutrik XLR (female)
• Output Connectors: 4 x Speakon NL4MD
• DC protection: Protection against continuous infrasonic signals
• VHF protection: Protection against strong signal ultrasonicznym outside the operating range speakers
• Thermal protection: protection against overheating. Is attached, upon reaching the device Temp. 75 ° C. Reconnecting the device when the temperature reaches 65 ° C
• Protection AC: Disables the amplifier output when the input voltage outside the operating range of the amplifier
• Limiter: Blocks distorted signals while maintaining signal output power at the maximum level
• Power consumption: 2.500 VA
• Thermal conditions: 0-45 ° C
• Frequency response: (1 W @ 8 Ω, ± 3 dB) 10 Hz - 30 kHz
• S / N Ratio:> 110 dBA (20 Hz - 20 kHz, A-weighted)
• THD: <0.05% @ 1/2 to total power
• Intermodulation Interference DIM100: <0.02% @> 0.1 W (typically <0.005%)
• SMPTE Intermodulation Interference: <0.05% @ 1/2 to total power
• Damping Factor> 5000 @ 100 Hz
• Speed Rise: 40 V / ms @ 8 Ohm
• Input voltage range: 100 - 240 V, ± 10% (50/60 Hz)
• Dimensions: Standardized 19 "/ 1U 483 x 44.5 x 455 mm
• Weight: 7.3 kg